Founded in 1989 by Ron and Janeen Joynt, DeCal Works has been the industry leader in pre-printed decals and custom graphics for 30 years. With a passion for racing and innovation, DeCal Works has, since its early days, focused its attention on high-quality products with great customer service.
In this video, Kris Keefer and Jay Clark go over a 2003 Suzuki RM125 bike rebuild and talk about the history of the machine. Kris and his son Aden ride the machine and then provide insight on this throwback video. Rear Hub Bearing Assembly
Keefer used to race an RM125 back in the day, so he also compares the machine to what he remembered riding as a kid. Aden then shares his feedback on his experience riding the old machine.
Film: Spencer Owens Edit: Simon Cudby
PWR121-100 Garage Buddy Rebuild Kit -Standard bore Pro-Lite piston, rings, pin, clips, top end gaskets, complete crankshaft, main bearings, bottom end gaskets , seals, hour meter and bracket, assembly lube. WPP3008 Clutch basket CPK021 Clutch pack kit CV4 High Temperature Radiator cap
55.10124 Carb rebuild kit 53.111023 Throttle cable 53.120051 Clutch cable 57.3221 Water pump rebuild kit 18.3299 Inner clutch hub 18.P3296 Pressure plate 24.110013 Steering bearing kit 37.63005 Front caliper rebuild kit 37.910002 Front master cylinder rebuild kit 37.910007 Rear master cylinder rebuild kit 07.FS32080- Front sprocket 07.RA32080- Rear sprocket alloy 07.RC520120CG MX Roller chain, gold 26.640026 Countershaft seal kit 33.0001 Upper and lower chain roller 26.210047 Swingarm bearing kit 26.110132 Linkage bearing kit 26.310003 Upper shock bearing kit 40.S475810 Fork seals and wiper kit 40.F4758D Dust cap set 39.160032 Bushing set 26.810001 Rear shock seal head kit
Factory Fatty Pipe Shorty Silencer Full Carbon by Legacy Carbon
Full Plastics Kit, Mud Flap, Chain Slider
Podium 7/8” Bars MX V2 Half Waffle Grips Grey
Custom Graphics Kit, Preprinted Number Plate Backgrounds Frame Tape
Custom Engraved Cylinder Head with Race dome
MX 53 Front & Rear Tires
Elite Clutch Perch Assembly Brake Lever Valve Stem Caps Oil Filler cap Brake Cap Front & Rear Brake Clevis Fasst Co Stand
Rear Brake Caliper Cover Skid Plate Pipe Hanger Ignition Cover Rear chain guide Case Saver
Apex Titanium Footpegs off current YZF (ground stop to sit level)
Full Wheel Set Brake Rotors Front & Rear Shift Lever
Full Nickel Wurks kit for engine and chassis
R-50 Two-Stroke Pre-Mix & Chemicals
Left Hub Bearing Founded in 1989 by Ron and Janeen Joynt, DeCal Works has been the industry leader in pre-printed decals and custom graphics for 30 years. With a passion for racing and innovation, DeCal Works has, since its early days, focused its attention on high-quality products with great customer service.